Step 5: Using The Wireless Controller - Canon opture S1 Instruction Manual

Step 5: Using the Wireless Controller

Inserting the Battery (Lithium Button Battery CR2025)
1. Press the tab in the direction of
the arrow and pull out the battery
holder.
2. Place the lithium button battery
with the + side facing up.
3. Insert the battery holder.
Using the Wireless Controller
Point it at the camcorder's remote
sensor when you press the buttons.
A single remote sensor is located at
the back of the camcorder.
The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
If the wireless controller does not work, check if the remote sensor is set to
[OFF
When the camcorder cannot be operated with the wireless controller, or when it
can only be operated in very close range, replace the battery.
22
] ( 67).
Tab