Auto-Downloading - Canon opture S1 Instruction Manual

I
Downloading Images (ImageBrowser)
Below explains the procedure for connecting a camcorder to a computer using
the USB cable. For connecting a card reader/writer, see Using a Card Reader/
Writer (
OJ
44).
o
If a memory card contains an enormous volume of images (approx.
1000 or more), you may not be able to download images with
ImageBrowser or an OS standard software depending on the computer
you are using or the installed OS. In this case, use a card reader to
download images.
o
Observe following precautions when the camcorder's card access indicator
is flashing (the camcorder is reading or writing from or to the memory card).
Failure to do so may cause memory card data to become corrupted.
- Do not open the memory card cover, remove the memory card or detach
the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the POWER switch or the TAPE/CARD
switch.
o
Images recorded onto the memory card or downloaded to the hard disk are
important original data files. Create a copy of the file first before working on it
on your computer.
You can select a downloading method in the Camera Control window.
• Auto-downloading
1
Connect the camcorder to the computer (OJ 36).
To start the Camera Control window manually, double-click the [Canon
CameraWindow] icon located on the desktop. If the [Canon CameraWindow]
icon is not on the desktop, double click the [Canon Utilities] folder on the drive
where the program was installed, followed by the [CameraWindow] folder and
the [CameraWindow] icon.