Installing The Digital Video Software - Canon opture S1 Instruction Manual

I
Installing the Digital Video Software
=
Before you connect the camcorder to the computer with the USB cable for the
. . first time, you must install the Digital Video Software.
Mac OS X (version 10.1.5/10.2/10.3) Users:
Your digital video camcorder is equipped with the standard Picture Transfer
Protocol (PTP). This protocol enables you to download images by simply
connecting the camera to a computer with the USB cable (using software such
as iPhoto or Image Capture preinstalled on Mac OS X).
However, please note that there are several limitations to downloading images
with this method.
o It may take a few minutes, after connecting the camcorder, until you can
download images.
o Only AVI* movie files can be downloaded. Thumbnails cannot be
. downloaded.
*
Two files are created in the camcorder (for example: [MVI_0001.AVI] and
[MVI_0001.THM]). [MVI_0001.THM] files cannot be downloaded but
movies can still be played back on the computer.
o Mac OS X version 10.2/10.3
- When downloading the images by Image Capture that comes with Mac OS
v1 0.2/1 0.3, the Exif version may change to 2.1 and image information may
be modified. Either installlmageBrowser to download the images or use
the following procedures.
1) Connect the camcorder to the computer, and start Image
Capture.
2) Click [Options].
3) Remove the checkmark from [Embed Colorsync profile] in the
[Download Options] tab and click [OK].
1
Close all programs that are running, and check that a
camcorder is not connected to the computer.
2
Set the DIGITAL VIDEO SOLUTION DISK in the computer's
CO..ROM drive.
3
Double click the CD..ROM icon and the
[CanonDigitaIVideolnstaller] icon.