Basic Operations; Switching The Power On/ Off; Adjusting The Volume - Kenwood TM-D710A Instruction Manual

SwITChINg ThE POwER ON/ OFF

Press the [ ] switch to switch the transceiver ON.
• The power on message momentarily appears on the display.
• If the transceiver power on password has been activated {Menu No.998}, you must first
enter your password before you can operate the transceiver.
Press the [ ] switch again to switch the transceiver OFF.

AdjuSTINg ThE VOlumE

Rotate the [BAND SEL] (VOL) control of your selected band clockwise to
increase the volume and counterclockwise to decrease the volume.
Note: Some functions of this transceiver, such as the beep and voice announcements, have their
own volume settings. Adjust those settings to your desired values.
16

BASIC OPERATIONS