Before Assembly; Assembly Instructions - York Fitness HAMMERTONE 5037 925 GYM Assembly Instructions Manual

Table of Contents

Advertisement

MODEL # 5037 - UK

Before assembly

This must be read before you start assembling this unit.
Great care has been taken in design and how to assemble this unit.
All bags of nuts and bolts have been packed with ease of assembly in
mind. You must follow the assembly instructions exactly as outlined.
You will need at least one person to help you assemble this unit, two
would be better. Assemble this unit starting at the beginning and work
to the end. The assembly instructions are set out so that you are only
doing one section at a time, therefore you will finish one section and
move on to the next. Do not do what most people do, when all else
fails they read the assembly instructions. If something is missing when
assembling this unit, you must notify us of the part number of the exact
nut, bolt or part that is missing and the colour of the model you
purchased.
To help you assemble this unit we have used line drawings. Check the
line drawings for the exact positioning of the parts.
This unit will need to be checked at least once a week for wearing wire
ropes, nuts and bolts that can work loose, upholstered pieces working
loose and wear on pivot assemblies.
WARNING: WIRE ROPES DO WEAR OUT!!
The way to check the wire ropes is to run your fingers lightly along
them and if you start to feel they are frayed, please write to use for
replacements. This is for your own safety.
WARNING: YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!
If the box containing the parts for the 925 gym was unopened
when you purchased it and there is a shortage, please notify us by
mail and send a copy of your receipt. If the box was opened and there
is a shortage, the dealer is responsible. Please indicate to us the part
number which is missing and we will return the missing part by return
mail.
HAMMERTONE
925 GYM

ASSEMBLY INSTRUCTIONS

CANADA
AUSTRALIA
YORK BARBELL CO LTD
YORK BARBELL (AUST.) PTY. LTD.
1450 SOUTH SERVICE ROAD WEST
UNIT 1, LOT 2
OAKVILLE, (TORONTO) ONTARIO,
SWAFFHAM ROAD, MINTO,
CANADA L6L 5T7
N.S.W. 2566, AUSTRALIA
TEL: (905) 827-6362
TEL: (02) 9603 8444
FAX: (905) 827-9593
FAX: (02) 9603 8555
WARNING:
Always hold the weight stabilizer pin with one hand when you are
changing the weight selector pin. This is a safety precaution.
WARNING:
It is very important that you do not throw out or destroy these assembly
instructions as you never know when you will move or wish to relocate
this unit. These must be kept on hand for future reference.
EXTRA TRAINING RESISTANCE
This unit incorporates a multiplying system which increases the weight
resistance up to 50% on the PRESS and PEC exercises.
TOOLS NEEDED TO ASSEMBLE COMPACT 925 GYM:-
a) wrenches :- 2 x 9/16"
14mm
2 x 3/4"
19mm
1 x 5/8"
16mm
1 x 1/2"
13mm
1 x 7/16"
11mm
b) large screwdriver
c) hammer
PLIERS SHOULD NOT BE USED!!
This machine should be assembled finger tight in the beginning to
allow for proper alignment.
Warnings:
Consult your doctor before participating in this or any exercise program
Never lift weights alone. There should always be someone readily available
to help in case of difficulty.
Ensure that all nuts and bolts are fully tight before using any exercise equip-
ment.
Always wear suitable clothing and footwear e.g. track suit and training shoes.
Children should not be allowed on or around the machinery or equipment, even
when not in use.
Do not eat large meals before exercising.
Always warm up well before exercising as this will prevent muscle strain.
Remove jewellery, rings, chains and pins before exercising.
Check for full engagement of locking pins.
U.K.
YORK BARBELL (U.K.) LTD
CHURCHILL WAY
DAVENTRY, NORTHANTS
ENGLAND NN11 4YB
TEL: (01327) 701800
FAX: (01327) 706704
PAGE 2
07/98

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hammertone 5037925 gym

Table of Contents