Download  Print this page

Various Cd Playback Features; Listening To The Desired Sequence (Program Playback) - Kenwood HM-333 Instruction Manual

Kenwood instruction manual micro hi-fi component system hm-333
Hide thumbs

Advertisement

Various CD playback features

Listening to the desired sequence
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
Select the CD input.
1
Let the "PGM" indicator light.
Press in stop mode
2
Select track numbers in the order you want to play them.
1
Select the track.
1
4
7
10
2
(Go to step
within 20 seconds.)
2
Confirm the selection.
(To select more than one track, repeat steps 1 and
2 for each track.)
3
Start playback.
PGM
2
3
5
6
8
9
0
SET
6
CD
(program playback)
Lights
P G M C D
Selection of tracks
P G M C D
Press the numeric keys as shown below....
To select track No. 23
To select track No. 40
÷ Up to 32 tracks can be programmed. When "PGM FULL"
is displayed, no more tracks can be programmed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ When the total time of CD program is 256 minutes or
more, the time display shows " - - : - - ".
÷ Tracks will be played in the order they were pro-
grammed (following the program numbers).
÷ When the 4/ ¢ key is pressed during play, the pro-
gram will jump to the preceding or the following track
respectively.
÷ When the 4 key is pressed once during playback, the
play position returns to the beginning of the current
track being played.
Various CD playback features
Program position of the track
to be selected next.
: +10
2, 3
X
: +10
4, 0
X
31

Advertisement

loading

  Related Manuals for Kenwood HM-333

This manual is also suitable for:

Rxd-333s