Muting The Sound Temporarily - Kenwood HD-7 Instruction Manual

Muting the sound temporarily

Remote control unit only
MUTE
Adjust the left/right volume balance
Main unit only
1 Select "BALANCE" as follows.
1 Press the "menu" key.
1
2 Select "BALANCE" with the
"volume/multi control" knob.
When the "volume/multi control "
2
knob is turned, switching is done
as follows.
3
Return to the original status is
made when no operation is per-
formed within 20 seconds.
2 Press the "set" key.
2 Adjust the left/right volume balance with
the "volume/multi" control knob.
The right volume
decreases.
2 Press the "set" key.
MUTE
Blinks
"AUX INPUT ?"
"TONE ?"
"BALANCE ?"
"TIME ADJUST ?"
"TIMER SET ?"
"A.P.S. SET ?"
"DIMMER ?"
The left volume
decreases.
÷ Press again to resume the original volume.
÷ This is also canceled when the volume is changed.
Listening to the original sound of the
source (source direct)
The sound from CD or another source can be heard
as faithful as possible to the original sound by not
passing it though the sound adjustment circuits
of this unit.
Main unit only
1 Press the "sound" key repeatedly to select
"S.DIRECT".
Each press switches the modes as follows.
"N.B.1"
"N.B.2"
* "TONE 1"
* "TONE 2"
* "TONE 3"
"SOURCE DIRECT"
"SOUND MODE OFF"
* "TONE 1(2,3)" is not displayed when "BASS"
and "TREBLE" both are set to "0".
÷ When source direct is selected, N.B1, N.B2,
and TONE1, TONE2, TONE3 are cancelled.
÷ To return to normal mode, press the "sound"
key repeatedly to select "SOUND MODE
OFF".
Direct selection of the source direct function
Main unit only
÷ To return to normal mode,
press the "sound" key re-
peatedly to select "SOUND
MODE OFF".
17
Basic use method
HD-7/EN
S.DIRECT
Lit
S.DIRECT
Lit