Download  Print this page

Maintenance Schedule; Lubrication Chart - Husqvarna 700 DRT 96093000402 Operator's Manual

Hide thumbs

Advertisement

Table of Contents
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Inspect Spark Arrester / Muffler
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins
Replace Spark Plug
RH Gear Case Grease Fitting (1oz.)
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must main tain tiller
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tiller.
All adjustments in the Service and Adjustments section
of this manual should be checked at least once each
season.
Once a year you should replace the spark plug, clean
or replace air filter, and check tines and belts for wear.
A new spark plug and clean air filter assure proper
air-fuel mixture and help your engine run better and
last longer.
BEFORE EACH USE
Check engine oil level.
Check tine operation.
Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART").
MAINTENANCE
1,2
2
IDLER
BRACKET
SAE 30 OR 10W-30 MOTOR OIL
REFER TO MAINTENANCE "ENGINE" SECTION
EP #1 GREASE
12
SERVICE DATES

LUBRICATION CHART

ENGINE
RH GEAR CASE
GREASE FIT TING
WHEEL
HUB
THROTTLE CONTROL
DEPTH
STAKE PIN
LEVELING
SHIELD
HINGES

Advertisement

Table of Contents
loading

  Related Manuals for Husqvarna 700 DRT 96093000402

This manual is also suitable for:

700 drt96093000402