Temperature Setting; Cleaning And Maintenance - Black & Decker F1500 User Manual

•
Do not touch the soleplate until it has cooled
down.
•
Do not immerse the appliance, cored set or
plug in liquids
•
Always disconnect the appliance from the
supply before cleaning, or carrying out any
maintenance on the appliance.
•
This product is designed to remove creases
from fabrics using heat and is not to be used
for any other purpose.
•
The iron must not be left unattended while it
is connected to the supply mains
•
The plug must be removed from the
socket-outlet before the water reservoir is
filled with water.
•
The iron must be used and rested on a
stable surface.
•
The iron is not to be used if it has been
dropped, if there are visible signs of damage.
Before first use
•
Remove all packaging from the appliance.
•
Clean the appliance before first use.
Use
Warning! Do not leave the appliance
unattended while it is connected to the power
supply and during the cool down period.

Temperature setting

The required temperature setting depends on
the garment fabric.
•
Adjust the temperature control dial (4) to the
required setting:
•
Synthetics
••
Silk/wool
•••
Cotton/Linen
If you are unsure of the fiber content of a
garment: start with a low temperature setting
and test on a small area (seam or inside hem). If
wrinkles remain, gradually increase the heat
setting until you find the optimum setting.
Using the iron
•
Stand the appliance on its heel rest (6).
•
Plug the appliance in and switch on.
•
Adjust the temperature control dial (4) to the
required setting.
The heating light indicator (5) will switch off
when the appliance has reached the required
temperature.

Cleaning and maintenance

Before cleaning and maintenance, remove the
plug from the socket and allow the appliance to
cool.
Warning! Before cleaning and maintenance,
switch the appliance off, remove the plug from
the socket and allow the appliance to cool.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other liquid.
•
Pour out any remaining water after each use
by tilting the appliance forward.
•
Wipe the exterior with a damp cloth.
•
Do not use scouring pads.
•
If necessary, use a mild detergent to remove
spots.
•
Do not use any abrasive or solvent based
cleaner.
•
Do not immerse the appliance in water or
any other liquid.
ENGLISH
5