Digital Connections - Kenwood VR-606 VR-616 Instruction Manual

Setting up the system

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD)
format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section carefully.
FM
75Ω
ANTENNA
VIDEO
DVD
IN
MONITOR
OUT
VIDEO 2
IN
VIDEO 1 VIDEO 1
IN OUT
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See "Connecting video components".)
10
EN
SYSTEM
DVD
CONTROL
GND
CD / DVD
OPTICAL
VIDEO 2
AM
COAXIAL
DIGITAL IN
AUDIO DVD / 6CH INPUT
CENTER
L
R
SUB
PHONO CD / DVD REC OUT PLAY IN REC OUT PLAY IN PLAY IN FRONT SURROUND
WOOFER
MD / TAPE VIDEO1 VIDEO 2
SUB WOOFER
PRE OUT
DVD / 6CH
CD / DVD
OPTICAL
VIDEO 2
COAXIAL
DIGITAL IN
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital
demodulator
(DEM-9991D)
(sold separately)
AC OUTLETS
S VIDEO
AC110V-120V / 220V-240V~
AC 220-
240V~
MONITOR DVD VIDEO 2
OUT IN IN
AC 110-
120V~
FRONT
CENTER SURROUND
SPEAKERS SPEAKER SPEAKERS VOLTAGE
50 / 60Hz
(8-16Ω) (8-16Ω) (8-16Ω) SELECTOR
SWITCHED
TOTAL 90W MAX.
+ +
- -
R L C R L
RED WHITE GREEN GRAY BLUE
SPEAKERS
COAXIAL DIGITAL OUT
(AUDIO)
Connect the video signal and analog
audio signals to the VIDEO 2 jacks.
(See "Connecting video components".)
DOLBY DIGITAL RF
OUT (AUDIO)
PCM OUT
LD player
OPTICAL DIGITAL OUT (AUDIO)
Optical fiber cable
CD or DVD player
Component with DTS,
Dolby Digital, or PCM
COAXIAL DIGITAL OUT
9
7