Names And Functions Of Parts; Main Unit - Kenwood KRF-X9060D Instruction Manual

Names and functions of parts

Main unit

POWER
STANDBY
STANDBY
ON/STANDBY ON/STANDBY
A SPEAKERS B
(For VR-6070)
POWER
-ON –OFF
PHONES
1 POWER ON/OFF key
(For KRF-X9060D)
Use to turn the main power ON/OFF.
2 ON/STANDBY
key
(For KRF-X9060D)
Use to turn the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER ON/STANDBY
(For VR-6070)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 A SPEAKERS B keys
Use to turn the A/B speakers ON/OFF.
4 THX key
Use to switch the status of THX.
5 SPEAKER EQ key
Use to select SPEAKER EQ's setting.
6 Surround indicators
THX indicator
Lights when the receiver is in the THX mode.
SPEAKER EQ indicator
Lights when the receiver is in the SPEAKER
EQ mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
Standby mode
While the standby indicator is lit, a small amount of power is supplied
to the system to back up the memory. This is called standby mode.
Under the condition, the system can be turned ON by remote control
unit.
6 EN
Speaker MUTE CLIP
indicators indicator indicator
SP MUTE OPTICAL 6CH INPUT
A B CLIP
COAXIAL
L C SW R
LFE
SL S SB SR
Speaker selection indicators
Input channel indicators
Output channel indicators
THX DOLBY DIGITAL
SPEAKER EQ DTS
ACTIVE EQ CS II
THX SPEAKER EQ ACTIVE EQ DSP
DVD/6CH CD/DVD PHONO
VIDEO 1 VIDEO 2 VIDEO 3
DTS indicator
£
Lights when the receiver is in the DTS mode.
CS q indicator
Lights when the receiver is in the CIRCLE
£
SURROUND II mode.
7 ACTIVE EQ key
Use to select ACTIVE EQ's setting.
8 DSP key
Use to select any of the DSP mode.
key
9 STEREO key
£
Use to switch the listen mode to STEREO.
0 INPUT MODE key
§ Use to switch between the full auto, digital
and analog inputs.
! DIMMER key
fl
Use to select the REC MODE.
¶ Use to adjust the brightness of the display.
@ VOLUME CONTROL knob
# MUTE key
‡
Use to temporarily mute the sound.
$ PHONES jack
•
Use for headphone listening.
% Input Selector keys
• (DVD/6CH, CD/DVD, PHONO, TUNER,
VIDEO 1, VIDEO 2, VIDEO 3, MD/TAPE)
Use to select input sources.
fl
Input mode
indicators
DTS DOLBY DIGITAL
AUTO DETECT
MATRIX
ANALOG 96kHzfs DSP MODE DISCRETE
Display
STEREO INPUT MODE DIMMER
TUNER
SOUND TONE SETUP
MD/TAPE
BAND AUTO MEMORY
Connection at POWER ON/OFF key (for KRF-X9060D)
The power in this equipment will not be completely cut off from the AC
wall outlet when the main switch is turned OFF.
Listen mode
indicators
RDS indicators
STEREO NEO:6 RDS
THX
PTY
PRO LOGIC LOUDNESS CS II Surround EX
AUTO
MEMORY
STEREO
TUNED
Frequency display
Input display
Preset channel display
Surround mode display
DOWN
MULTI CONTROL LISTEN MODE
S VIDEO
^ SOUND key
fl
Use to adjust the sound quality and the ambi-
fl
ence effects.
& BAND key
Use to select the broadcast band.
* AUTO key
¶
Use to select the auto or manual tuning
fl
mode.
( TONE key
°
Use to switch the status of TONE control.
) MEMORY key
9
Use to store radio stations in the preset
memory.
¡ SETUP key
Use to select the speakers' settings etc.
™ M M M M M / ? ? ? ? ? keys
ª
Use for selection adjustments during SOUND,
‚
SETUP and PRESET CHANNEL functions.
£ MULTI CONTROL knob
§
¶
Use to control a variety of settings.
¢ LISTEN MODE knob
•
Use to select the listening mode.
∞ AV AUX (S VIDEO, VIDEO, L-AUDIO-R)
§
jacks
§ AV AUX key
Use to switch the input to AV AUX.
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
VOLUME CONTROL
UP
MUTE
AV AUX
VIDEO L-AUDIO-R
°
º
º
¶
º
£
£
£
fl
)
)