Securing The Support Brackets - Miele KM 404 Installation Instructions Manual

Gas cooktop
Table of Contents

Advertisement

Installation
Securing the support bars
c
Wood or Corian countertops
^ Arrange the bars, b, as shown in the
illustration.
1
^ Drill
/
" (1.5 mm) pilot holes through
16
the brackets and secure them using
the supplied screws.
^ Fill the gap, c, between the bars and
the countertop using the supplied
silicon sealant.
Granite countertops
For granite countertops, the support
bars, b, can be secured with double
sided tape or construction adhesive.
Do not allow the bars to "float", they
must be securely fastened. Fill the gap,
c, between the bars and the
countertop using the supplied silicon
sealant.
The screws are not necessary for
granite countertops.
10
d

Securing the support brackets

^ Place the brackets, a, as shown in
the illustration.
1
^ Drill two
/
" (1.5 mm) pilot holes for
16
each bracket and secure them using
the supplied screws.
Granite countertops
A granite countertop must be
prepared with a hole drilled at the
position indicated, d, to secure
each support bracket (see
illustration).
Using a piece of double sided tape or
construction adhesive press the
support brackets supplied, a, into the
position indicated in the illustration,
flush with the top edge of the
countertop. Secure each bracket with
one screw.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Km 406

Table of Contents