Listening To A Source Component; Listening To Music With Pure Audio Mode - Kenwood KRF-V5200D Instruction Manual

Listening to a source component

VOLUME CONTROL
INPUT SELECTOR
œ Select the source you want to listen to.
When using the remote control unit:
Use the Input source keys to select a source.
The following input source keys are prepared on the
remote control unit:
• Tuner (FM/AM broadcast reception)
• "CD/DVD"
• "MD/TAPE"
• "VIDEO1"
• "VIDEO2"
• "DVD/6CH"
• "AUX"
• "AV AUX"
When using the main unit:
Use [INPUT SELECTOR] to select a source.
The input sources change as shown below with [INPUT
SELECTOR]:
1 Tuner (FM/AM broadcast reception)
2 "CD/DVD"
3 "MD/TAPE"
4 "VIDEO1"
5 "VIDEO2"
6 "DVD/6CH"
7 "AUX"
• "AV AUX" can be selected with [AV AUX].
∑ Start playback from the selected source.
é Use [VOLUME %/fi] to adjust the volume.
AV AUX
VOLUME /
Input source keys
Listening to music with PURE
AUDIO MODE
The PURE AUDIO MODE allows you to enjoy music sources in
high-quality stereo.
PURE AUDIO MODE
œ Select the music source you want to listen to.
∑ Start playback from the selected source.
é Press [PURE AUDIO MODE].
• While in PURE AUDIO MODE, the listen mode is set to stereo.
• The display will be turned off and PURE AUDIO MODE indicator
lights up.
PURE AUDIO MODE indicator
PURE AUDIO MODE
PURE AUDIO MODE
To cancel
Press [PURE AUDIO MODE] again.
• PURE AUDIO MODE is also cancelled when listen mode is
changed. See <Surround play>. ∞
Notes:
• When the input mode is "6CH INPT", the listen mode does not
change. (<Selecting the input mode> ))
• During PURE AUDIO MODE, no video signal is output.
• When the PURE AUDIO MODE is canceled, the listen mode
remains in stereo if the input signal is digital.
PURE AUDIO MODE
21
English