Digital Connections - Kenwood KRF-V4550D Instruction Manual

Digital connections

The digital in jacks can accept Dolby Digital, or PCM signals. Connect components capable of outputting Dolby
Digital, or standard PCM (CD) format digital signals.
If you have connected any digital components to the receiver, be sure to read the "Input mode settings" section
carefully.
COAXIAL
DIGITAL
OUT
(AUDIO)
RF digital demodula-
tor (DEM-9991D)
(sold separately)
To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D).
Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver.
Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See "Connecting video components".)
CD player
COAXIAL DIGITAL OUT (AUDIO)
DOLBY DIGITAL RF OUT (AUDIO)
PCM OUT
7
OPTICAL DIGITAL OUT
(AUDIO)
Optical fiber cable
Component with a Dolby Digital, or
PCM COAXIAL DIGITAL OUT
Connect the video signal and analog
audio signals to the VIDEO2/MONI-
TOR jacks.
(See "Connecting video compo-
nents".)
LD player
Setting up the system
11