Tuning; Station Preset Memory; Clock Display - Kenwood KRC-15RG Instruction Manual

Kenwood cassette receiver instruction manual krc-279ra, krc-279rg, krc-179ra, krc-179rg, krc-25ra, krc-25rg, krc-15rg
Hide thumbs Also See for KRC-15RG:
Table of Contents

Advertisement

Tuning

1
Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
2
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
Press the AM button to select the MW and LW bands.
3
• Auto Seek Tuning
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when traveling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station seek
will receive channel 1.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
• The ST indicator lights up when stereo broadcasts are being
received.
• Please see the menu settings about selecting tuning mode.
(page22)

Station Preset Memory

Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
1
Select the band/ station that you want to have stored.
2
Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.

Clock display

Turning clock display On/Off:
Each time you press the CLK button, the display switches
between the Programme Service name (during RDS station
reception) and clock.
Displaying Frequencies:
Hold down the CLK button for two seconds or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
— 9 —

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents