Tel Mute - Kenwood KRC-15RG Instruction Manual

"DB" : Recalling the kenwood preset sound setting
Press the preset buttons (#1-5).
Settings: #1;FLAT, #2;ROCK, #3;POPS, #4;JAZZ, #5;EASY
NOTE
You can call the following settings with this function; bass
centre frequency, bass level, bass quality factor, bass extension,
treble centre frequency, and treble level setting.
"BAS" : Adjust the bass level.
Setting values: - 8 – + 8
"TRE" : Adjust the treble level.
Setting values: - 8 – + 8
"BAL" : Adjust the balance level.
Setting values: Left 15 – Right 15
"FAD" : Adjust the fader level.
Setting values: Front 15 – Rear 15

TEL Mute

Shut down the audio system temporarily whenever an
incoming call is received.
NOTE
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
Turning TEL Mute Function Off After Phone Call:
Hang the phone up.
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
— 7 —