Kenwood KOS-A300 Instruction Manual page 41

Kenwood external media controller instruction manual
Hide thumbs Also See for KOS-A300:
Table of Contents

Advertisement

N/A Device:
• An unsupported USB device is connected.
• Connection to the iPod has failed.
➪ Check that the connected iPod is an iPod
that is supported. See <About Audio file>
(page 29) for information on supported
iPods.
No Music Data/Error 15:
• The connected USB device contains no
playable audio file.
• Media was played that does not have data
recorded that the unit can play.
USB ERROR:
Some trouble may have occurred to the
connected USB device.
➪ Remove the USB device, then cycle the
power switch to ON. If the same display is
repeated, use another USB device.
iPod Error:
Connection to the iPod has failed.
➪ Remove the USB device and then
reconnect it.
➪ Confirm that the software for the iPod is
the latest version.
USB REMOVE (Blink):
The Remove mode has been selected for the
USB device/iPod. You can remove the USB
device/iPod safely.
NO Number:
• The calling party does not notify a caller ID.
• There is no phone number data.
No Data:
• There is no outgoing call list.
• There is no incoming call list.
• There is no missed call list.
• There is no phone book list.
No Entry:
The cell-phone has not been registered
(pairing).
HF Disconnect: The unit cannot communicate with the cell-
phone.
HF Error 07:
The memory cannot be accessed.
➪ Turn off the power and on again.
HF Error 68:
The unit cannot communicate with the cell-
phone.
➪ Turn off the power and on again.
Un Known:
The Bluetooth device cannot be detected.
Device Full:
5 Bluetooth device have already been
registered. No more Bluetooth device cannot
be registered.
PIN Code NG:
The PIN code is wrong.
Connect NG:
The unit cannot be connected to the device.
Pairing Failed: Pairing error.
Err No Matching:
The voice tag is wrong. Voice cannot be
recognized because of an unregistered voice
tag, etc.
Too Soft:
Voice is too small and cannot be recognized.
Too Loud:
Voice is too large to be recognized.
Too Long:
The word or speech is too long to be
recognized.
No Phonebook: Data is not contained in the phone book.
No Message:
No short message in In Box.
No Record:
The voice tag is not registered in the
phonebook.
Memory Full:
The number of voice tags reaches the
maximum number to be registered in the
phonebook.
Favorite: No Memory:
The procedure is not registered to Favorite
Preset Memory
NO ACCESS:
The procedure preset with Favorite Control
cannot be available. The preset content may
not be recalled depending on the selected
source or mode.
NO VOICE:
No call.
HD Memory Full:
The tag memory of HD Radio is FULL.
iPod Memory Full:
The iPod memory is FULL.
No Tag Function:
iPod which does not support the tag memory
is connected.
Tag Error:
The tag could not be stored because of an
occurrence of tag error.
N/A Channels: No receivable channel and category.
REMO ERROR: Some trouble may have occurred to the
controller.
➪ After checking the connection to the
controller, turn off the power and on
again.
Page 41
|
English

Advertisement

Table of Contents
loading

Table of Contents