Kenwood KOS-A300 Instruction Manual page 38

Installation
Installation of Display unit
— Display Stand Used —
1
Install the display bracket (Accessory #) to the
display stand (Accessory $).
Accessory&
2
Install the display unit to the display bracket
(Accessory #).
Screw hole
3
Remove the coated paper from the display stand
(Accessory $), and paste it on the mounting
surface.
Install the display unit using the screw holes
illustrated above when it cannot be secured firmly
using the double-sided tape.
38
|
KOS-A300
Accessory*
(Ø3 x 8)
Accessory^
Display
Accessory*
(Ø3 x 8)
Release coated paper
Installation of Display Unit
— Frame Used —
1
Using the display template (Accessory %), drill a
hole on the display installation position.
2
Install the display frame (Accessory ^) to the
installation hole made in step 1.
3
Install the display unit to the display frame
(Accessory ^).
⁄
• Use Removal tool (Accessory &) when you remove the
display unit from the display frame (Accessory ^).
Accessory(
Display
Accessory)