Table of Contents
Advertisement
EDID FUNCTION FOR HDMI MATRIX SWITCHER
To view the current EDID status:
Press EDID button; the button will flash blue and the display will show the current EDID Status.
Step 1.
Press EDID button to exit.
Step 2.
To change the current EDID status:
Method 1
Press EDID button; the button will flash blue and the display will show the current EDID Status.
Step 1.
Press the Input (source) button (bottom row) to select EDID mode.
Step 2.
Repeatedly depressing the Source 1 button will cycle up thru the options.
Repeatedly depressing the Source 2 button will cycle down thru the options.
The options are sequential and require repeated depressing of the button to cycle thru the options.
Options are:
Auto
1080p/2CH
1080p/5.1
1080p/7.1
1080i/2CH
720p/2CH
All Outputs will be set to the highest common resolution of all connected display devices.
Example for single source:
Destination> press #1 and then Source> press #1
Destination device #1 will set to the highest common resolution of source #1
Example for multiple sources
Destination device #1, #2, #3 will be set to the highest common resolution available and source device #1 will
output this same resolution.
Press the DEMO button to set EDID mode.
Step 3.
Method 2
In some cases, the display screen maybe dark, or no picture, distorted color or without sound. This is caused by import ability of
the EDID.
Some causes of this are:
1. Destination resolution 480p EDID. Source is 1080p or 720p
2. Destination resolution 1080p EDID. Source is 480p, 720p or 1080p
3. Either Source or destination has no EDID code, or firmware is older version; in this event, you can manually link source EDID
to destination EDID.
Press EDID button; the button will flash blue and the display will show the current EDID Status.
Step 1.
Press Output button 1 thru 8 destination row on the affected display.
Step 2.
Press DEMO to save setting and return switcher to regular operating mode.
Step 3.
EDID FUNCTION
Display = Auto <Default>
Display: 1080p-2ch
Display: 1080p-51
Display: 1080p-71
Display: 1080i-2ch
Display :720p-2ch
The switcher will return to operation mode.
3
Advertisement
Table of Contents
