Selecting The Fm Reception Mode - JVC RX-7032VSL Instructions Manual

3. Press FM/AM PRESET 5 or ∞ to select a
channel number while the channel number
position is flashing.
ANALOG
L R
LINEAR PCM
SUBWFR
4. Press MEMORY again while the selected channel
number is flashing on the display.
The selected channel number stops flashing.
The station is assigned to the selected channel number.
5. Repeat steps 1 to 4 until you store all the stations
you want.
To erase a stored preset station
Storing a new station on a used number erases the previously stored
one
To tune in a preset station
On the front panel:
RX-7032V AUDIO/VIDEO CONTROL RECEIVER
1. Press FM or AM to select the band.
The last received station of the selected band is tuned in.
2. Press FM/AM PRESET 5 or ∞ until you find the
channel you want.
• Pressing FM/AM PRESET 5 increases the number.
• Pressing FM/AM PRESET ∞ decreases the number.
From the remote control:
1. Press FM/AM to select the band.
The last received station of the selected band is tuned in.
• Each time you press the button, the band alternates between
FM and AM.
2. Press the 10 keys to select a preset channel
number.
• For channel number 5, press 5.
• For channel number 15, press +10 then 5.
• For channel number 20, press +10 then 10/0.
• For channel number 30, press +10, +10, then 10/0.
Note:
When you use the 10 keys on the remote control, be sure that they
are activated for the tuner, not for the CD and others. (See page 42.)
TUNED STEREO
SPEAKERS 1
VOLUME

Selecting the FM Reception Mode

RX-7032V AUDIO/VIDEO CONTROL RECEIVER
When an FM stereo broadcast is hard to receive or noisy, you can
change the FM reception mode while receiving an FM broadcast.
• You can store the FM reception mode for each preset station (see
page 21).
While listening to an FM station, press FM MODE.
• Each time you press the button, the FM reception mode alternates
between "AUTOMUTING" and "MODE MONO."
ANALOG
L R LINEAR PCM
SUBWFR
ANALOG
L R LINEAR PCM
SUBWFR
AUTOMUTING: Normally select this.
When a program is broadcasted in stereo,
you will hear stereo sound;
when in monaural, you will hear monaural
sounds.
This mode is also useful to suppress static
noise between stations. The AUTO
MUTING indicator lights up on the display.
(Initial setting)
MODE MONO: Select this to improve the reception (but
stereo effect will be lost).
In this mode, you will hear noise while
tuning into the stations. The AUTO
MUTING indicator goes off from the
display. (The STEREO indicator also goes
off.)
Note:
When you use the FM MODE on the remote control, be sure that it is
activated for the tuner, not for the CD and others. (See page 42.)
TUNED STEREO AUTO MUTING
SPEAKERS 1
VOLUME
TUNED
SPEAKERS 1
VOLUME
22