Activating An Evacuation - Siemens FC10 Operating Instructions Manual

Fire detection control unit
Table of Contents

Advertisement

Operation
5.5

Activating an evacuation

20
Siemens Building Technologies
Fire & Security Products
Overview
It is possible to activate an evacuation without an alarm being triggered by a detec-
tor. In this case no alarm message is transmitted to the fire brigade.
Procedure
To activate an evacuation, please proceed as follows:
1. Enable the operating level 2 (password or key).
2. Press the key 'Evacuation'.
The LED 'Evacuation' lights up.
The fire alarm devices (e.g. horns) are activated
3. To cancel the evacuation, press the key 'Evacuation' again.
The LED 'Evacuation' no longer lights up.
The fire alarm devices (e.g. horns) are deactivated
The control unit is in normal operating condition again.
007995_a_en_--.doc
04.2004

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents