Panasonic KX-UT113 Getting Started

Sip
Hide thumbs Also See for KX-UT113:

Advertisement

Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for
future use.
Note
In this manual, the suffix of each model number (e.g., KX-UT113NE) is
omitted unless necessary.
Outline
This manual briefly describes basic information about the installation of the unit.

Related Documentation

Operating Instructions
Describes information about the installation and operation of the unit.
Administrator Guide
Describes information about the programming and maintenance of the unit.
These manuals and supporting information are provided on the Panasonic Web site
at:
http://panasonic.net/pcc/support/sipphone
Note
If the unit is connected to a Panasonic KX-NS1000 PBX, refer to the
documentation of the KX-NS1000 for information about the operation,
programming, and maintenance of the unit.
For details, consult your dealer.
Document Version: 2011-10
KX-UT113/KX-UT123
KX-UT133/KX-UT136
Model No.

Getting Started

SIP Phone

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-UT113

  • Page 1: Getting Started

    These manuals and supporting information are provided on the Panasonic Web site http://panasonic.net/pcc/support/sipphone Note • If the unit is connected to a Panasonic KX-NS1000 PBX, refer to the documentation of the KX-NS1000 for information about the operation, programming, and maintenance of the unit. For details, consult your dealer.
  • Page 2: Other Information

    Other Information Other Information Open Source Software Notice Parts of this product use open source software. For details about the open source software, see the Operating Instructions. Trademarks • Plantronics is a trademark or registered trademark of Plantronics, Inc.
  • Page 3: For Your Safety

    For Your Safety For Your Safety To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard and injury caused when the denotation is disregarded and improper use is performed.
  • Page 4: Installation

    For Your Safety Do not splash water on the AC adaptor or the power cord, nor get them wet. Doing so can result in fire, electric shock, or injury. If they do get wet, immediately disconnect the AC adaptor and power cord, and contact an authorised service centre.
  • Page 5: Wall Mounting

    For Your Safety The unit should only be connected to a power supply of the type as shown on the label on the unit. Completely insert the AC adaptor into the AC outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire. Placement Care should be taken so that objects do not fall onto, and liquids are not spilled into, the unit.
  • Page 6 For information regarding network setup of the SIP Phone such as IP addresses, please see the Operating Instructions. • If an error message is shown on your display, consult your phone system dealer or the network administrator. • Use only the correct Panasonic handset.
  • Page 7: Important Safety Instructions

    Do not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS For information of Compliance with EU relevant Regulatory Directives, Contact to Authorised Representative: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany...
  • Page 8: Accessory Information

    The illustrations may differ from the appearance of the actual product. Optional Accessories AC Adaptor* KX-A239AL (PQLV206AL)/KX-A239BX (PQLV206CE)/KX-A239UK (PQLV206E)/ KX-A239X (PQLV206)/KX-A239EJ (PQLV206E) Wall Mount Kit KX-A432X (for KX-UT113/KX-UT123) KX-A433X (for KX-UT133/KX-UT136) *1 To order an optional AC adaptor, please order using the "KX-A239" model number.
  • Page 9: Location Of Controls

    Location of Controls Location of Controls Front View For KX-UT136: KLM NO P QR...
  • Page 10 Location of Controls For KX-UT133: KL M NO P Q R...
  • Page 11 K L M A LCD (Liquid Crystal Display) KX-UT136 is equipped with a 6-Line LCD. KX-UT113/KX-UT123/KX-UT133 is equipped with a 3-Line LCD. KX-UT123/KX-UT133/KX-UT136 is equipped with an LCD backlight. B Soft Buttons (S1 to S4) S1 to S4 (located below the display) are used to select the item displayed on the bottom line of the display.
  • Page 12 Used to access your voice mailbox. L HOLD Used to put a call on hold. When a call is on hold, the Hold lamp (KX-UT113/KX-UT123 only) flashes red. M MUTE/AUTO ANSWER Used to receive an incoming call in hands-free mode or mute the microphone/ handset during a conversation.
  • Page 13: Left Side View

    Location of Controls Left Side View For KX-UT133/KX-UT136: For KX-UT113/KX-UT123: A Electric Hook Switch (EHS) Jack (KX-UT133/KX-UT136 only) B Headset Jack...
  • Page 14: Bottom View

    Location of Controls Bottom View For KX-UT133/KX-UT136: For KX-UT123:...
  • Page 15 Location of Controls For KX-UT113: A DC Jack B LAN Port C PC Port (KX-UT123/KX-UT133/KX-UT136 only) D Handset Jack...
  • Page 16: Attaching The Stand

    Gently push the stand in the direction indicated until it locks into place. The stand will be mounted in the high position. For KX-UT113/KX-UT123: Insert the catches of the stand into the hooks located in the unit. Gently push the stand in the direction indicated until it locks into place.
  • Page 17: Removing The Stand

    For KX-UT133/KX-UT136: Hold the stand with both hands. Gently rotate the stand in the direction indicated until it is released. For KX-UT113/KX-UT123: Remove the stand in the direction indicated while pushing the catches of the stand with both hands as shown.
  • Page 18 Connections Connections Notice Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Connections for AC Adaptor/LAN/PC For KX-UT133/KX-UT136: Optional AC adaptor To a switching hub To a PC...
  • Page 19 Handset Headset CAUTION Optional AC Adaptor • Use the following Panasonic AC adaptor: KX-A239AL (PQLV206AL)/KX-A239BX (PQLV206CE)/KX-A239UK (PQLV206E)/KX-A239X (PQLV206)/KX-A239EJ (PQLV206E) • The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the unit and is easily accessible.
  • Page 20 The PC port does not support PoE for connected devices. When connecting cables and the AC adaptor • Ensure that the Ethernet cables and the AC adaptor cord are clamped to prevent damage to the connectors. © Panasonic System Networks Co., Ltd. 2011 PNQX3557YA-VB DD0511MK1101...

This manual is also suitable for:

Kx-ut123Kx-ut133Kx-ut136

Table of Contents