Remote Control Layout
Refer to the "Turning the Projector On/Off" section.
Zooms the projector display in or out.
Chooses a display mode.
Adjusts image distortion caused by tilting projection
Selects items or makes adjustments to your selection.
Press "0~9" to input a password in the "Setting" >
To change source to VGA. This connection supports
analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and
To change source to Component video. This connector
To change source to S-Video.
To change source to HDMI™ (or DVI). (for the model
with HDMI™ or DVI connector)
Sends signals to the projector.
To pause the screen image.