Setting The Hotel Option Data - Samsung 590 Series Installation Manual

To Enter: Press the MUTE
To Exit from this menu : power off and turn on again.
✎
Depending on Model and Region, some menu are NOT exist at TV set.
Hotel TV Function
No
Category
1 Hospitality Mode
2 SI Vendor
3 Power On
4 Channel
[Hotel-590_690_790]BN68-04282R-Eng.indd 19

Setting the Hotel Option Data

→ 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
initial value
- Standalone
- OFF
Power On
Last Saved
Channel EN
Power On
1
Channel
Channel Type ATV
Power On
Last Saved
Volume EN
Power On
10
Volume
Min Volume 0
Max Volume 100
Power on
TV
source
Power On
Last Option
Option
Channel Setup -
Channel Editor -
Mixed Channel
ON
Map
Dynamic SI OFF
Channel Rescan
ON
Message
Pan Euro MHEG OFF
Description
Select the Hotel TV mode. (Standalone / Interactive)
Select the SI Vendor
Set the default values, which will be applied when the TV
is turned on.
- User Defined : Refers to the settings configured for
Power On Channel, Channel Type.
- Last Saved : Refers to the last saved settings.
TV will turn on to this particular Channel.
Provides channel Type description for Power On
channel selected. i.e.
Selected channel analog or Digital & antenna
selection(Air or Cable).
Set the default volume values which will be applied when
the TV is turned on.
- User Defined : Uses the settings configured for Power
On Volume.
- Last Saved : Uses the last saved settings.
TV will turn on with this Volume Level.
Minimum Volume Level setting user can set
Maximum Volume Level setting user can set
Select the Input source when TV is turned on initially.
Power On(AC Power On) Option
- STN-BY : Stand-By Mode
- Power On : Power On
- LAST OPT : Last Power State
User can set channel option.
Such as Auto Tunning, Manual Tunning, Antenna
setting.
Provided option for editing Channel Name and Number
and video.
Mute settings for channels in channel List.
Mix Air and Cable Channels
On : No Check of the DTV Program channel number.
(DTV channel editor accessible, but addtional channel
Program number update not supported)
Off : Check the DTV Program channel number. (DTV
channel editor inaccessible)
This is a display option for the OSD text that appears
when a user configures the country specifications in
hotel models. This option determines whether to activate
the items that are only executed after a manual user
confirmation when the notification message is displayed
while the country specifications are being configured.
On - When TV has an event for setting change because
of country spec, It will be shown on the screen.
Off - Even TV has an event for setting change, because
of country spec, it will not be shown on the screen.
If Pan EURO MHEG is set to On, MHEG is On
regardless of the product specifications or region. (Even
if the region does not support MHEG, it is supported in
case the hotel supports MHEG.)
19
English
2012-07-26 오후 2:46:49