Kenwood IC700 Series Instructions Manual page 9

the inside
important
To extend the life of your steam
station and to avoid a build up of
scale, it is essential that you rinse
out the boiler after every 10 refills or
once a month. If you live in a hard
water area increase the frequency of
cleaning. Do not use chemical
descaling agents or vinegar as they
may damage your appliance.
●
Clean the boiler making sure it has
been allowed to cool overnight first.
Turn the steam station upside down
and pull back the flap covering the
boiler cap .
Unscrew the boiler cap using a coin
and empty out any water. Add one
cup of tap or filtered water and
shake the appliance then empty out
all the water. Repeat this operation
until the water from the boiler comes
out clear and clean.
When cleaning is finished pour
500ml fresh tap or filtered water into
the boiler and screw the boiler cap
back on again without using
excessive force. Replace the cover.
The unit is now ready to use.
important: Aways add 500ml
water direct to the boiler after
cleaning to prevent damaging the
steam station.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
●
using your appliance
●
servicing or repairs
Contact the shop where you bought
your appliance.
6