Specifications - Yamaha RX7 Authorized Product Manual

CASSETTE MODE ERROR MESSAGES
MESSAGE
data error
Sum error
type error
SOUND SOURCE
PCM sounds, 12-bit resolution, 100
l
sampled
voices
l
Maximum polyphonic number: 8~16
MEM0RY CAPACITY
l 100 Patterns (Max. length: 99 measures)
l 20 Songs (Max. length: 999 parts)
l 3 Chains (Max. length: 90 steps)
l 10 Sets of Key Data (incl. 5 user-programmable
sets)
CONTROLLERS
l SLIDERS: Master Volume, Click Volume, Tempo,
Data Entry
Accent
l BUTTONS:
Stop/Continue/Shift/Compare, Start/Enter, In-
strument Keys A through X (24)
KEYS: PATTERN AND SONG OPERATION KEYS
l
(Pattern/Song, Real Time Write/Song Edit, Step
Write/Insert, Quantize/Delete,
Click/Tempo Change, Pattern Edit/Volume
Chagne, Clear, Copy), Effect, Damp, Tempo,
MODE AND JOB KEYS (Voice Edit, Key Assign,
Chain, Cassette/Cartridge, Sync, MIDI, Utility,
Job), Numeric Key Panel, -1/NO, +1/YES
DISPLAY
LCD: 16 Characters x 2 Lines
l
LEDs: Pattern, Song, MIDI, Sync, Multi, Effect,
l
Damp, Run
48
CAUSE
You have tried to verify cassette data. The type of
data is correct (e.g., Single Pattern data) but the
RX7 contains different data to that contained on the
cassette.
There is a checksum data error in data that you have
tried to verify or load from cassette.
You have tried to load or verify data from cassette,
using an incorrect Job number. For example, you
used the Load Single Pattern operation (Job #13)
when trying to load Voice data.

SPECIFICATIONS

1, Accent 2,
Swing/Repeat,
Save the data again, then execute the Verify opera-
tion once more.
Repeat the Load or Verify operation, making sure
that the playback level is high. Also, check that the
connections between the RX7 and the cassette re-
corder are correctly made, with cables that are
functioning properly. If necessary, clean and de-
magnetize the tape heads.
EITHER: Use the correct Job number.
OR: Use the correct cassette data.
CONNECTIONS
l AUDIO OUTPUTS: Phones, Left/Mono, Right,
Click
l
MIDI: In, Out, Thru
INTERFACE: Cassette (In/Out, DIN connector),
l
Data Cartridge port
CONTROL: Foot Switch
l
POWER: DC 12V In
l
DIMENSIONS (W x D x H)
439 x 270 x 78 mm(17 1/4" x 10 5/8" x 3")
l
WEIGHT
2.95 kg. (6 1/2 Ibs.)
l
POWER REQUIREMENTS (WITH PA-1210 12 V
VOLTAGE CONVERTOR)
l U.S. and Canadian model: 120 V, 50/60 Hz
l European model: 220-240 V, 50 Hz
* Specifications are subject to change without notice.
REMEDY