Assebmly - "Easy Wheel" System; Setting The Clock; Power Connection - Kenwood EW7507EK Instructions For Use Manual

ASSEBMLY - "EASY WHEEL" SYSTEM

Turn the radiator upside-down on a rug or a soft surface in order to prevent dama-
ging the paint finish. Fully unfold the castors by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location.
Your heater will minimize the effect of cold drafts.
The heater must not be placed immediately below a power-outlet.
Do not use this radiator in rooms having a surface area of less than 43 square feet
(4 sq.m.).

2. POWER CONNECTION

The radiator must be connected to a properly polarized A/C 110/120 V household
outlet in perfect working condition.
Keep loose clothing or bedding, furniture and flammable material away from away
from the power outlet where the heater is plugged into.
Your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not attempt to modify the plug to bypass this safety feature.
OPERATION AND USE

1) SETTING THE CLOCK

For the first time, set the clock to the correct time, proceeding as follows:
• Press the button "hour" until the display shows the correct hour setting.
• Press the button "min" until the display shows the correct minute setting.
When setting the clock time, the numbers will flash on the display.
The flashing numbers will continue for a few seconds until the adjustment has finished.
Once the numbers stop flashing the clock will start working.
To change the time, press and hold the hour or min button for at least 5 seconds or
until the numbers are flashing. Then proceed as above to modify both hours and
minutes.
correct time
HOW TO USE YOUR HEATER
AM
0
fig. 1
MAN
Set temperature
° F
3