Kenwood KDV-3241Y Instruction Manual page 4

Dvd receiver
Hide thumbs Also See for KDV-3241Y:
Table of Contents

Advertisement

Before use
This Product is not installed by the manufacturer of a
vehicle on the production line, nor by the professional
importer of a vehicle into an EU Member State.
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their waste
byproducts. Contact your local authority
for details in locating a recycle facility
nearest to you. Proper recycling and waste
disposal will help conserve resources whilst
preventing detrimental effects on our
health and the environment.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and says
that the component uses laser beams that have been
classified as Class 1. It means that the unit is utilizing
laser beams that are of a weaker class. There is no
danger of hazardous radiation outside the unit.
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU-representant:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
4
|
KDV-3241Y
TV system selection
You must select the appropriate system mode for
your TV system. When the selected system does not
coincide with the system of your TV, normal colour
picture may not be displayed.
AUTO: Select when the unit is connected with Multi
system TV.
NTSC: Select when the unit is connected with NTSC-
TV.
PAL: Select when the unit is connected with PAL-TV.
1
Press [SRC] to select the CD/DVD.
2
0
Press [
] EJECT.
Confirm that no disc is loaded in the built-in player
("NO DISC" is displayed).
Press and hold [ENTER/ 38] ([8] on the
3
remote control) for more than 5 seconds.
Each time you press and hold the button for more
than 5 seconds, the TV system switches as follows:
PAL—AUTO—NTSC
Symbols used in this manual
A section whose title has one of the following
symbols is applicable only to the disc represented by
the symbol.
DVD
DVD
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
WMA
WMA files

Advertisement

Table of Contents
loading

Table of Contents