Advertisement
WCR-G54 Router Access Point Settings
Buffalo Router Wireless Settings:
Launch Web Browser, enter
http://192.168.11.1
Enter. Then type username as "root", default no password.
1.
Click
"Wireless
Config" -> Click "Basic(11g)". Under SSID, the default
"SSID" (wireless network signal name) of router is set to
Airstation's MAC Address
another name as SSID, please choose "Use", and input a new name on
the field
behind.(Remark: Cannot exceed 32 characters, and leaving
blank in between is not
recommended),
Under
Wireless
Channel, please fix a wireless channel for your router.
(Using
"Auto
Channel" is not recommended). Please try channel 1,
11, or other channels until the wireless network is stable. Please click
"Apply" to save settings.
Last Update 24April 2008
in address bar and then press
"Use
(XXXXXXXXXXXX)". If you want to use
Please click "Apply" again, and wait for 2 minute to complete settings.
6,
5.
To secure your wireless network, please click "Security(11g)".
Under
"Wireless
- Choose "WEP",
- Set
"WEP Encryption
(WEP128)".
- Behind "1", input a 13 characters wireless encryption key to secure the
wireless network.
- Click "Apply" button to save settings.
Encryption",
Key" to
"Character Input: 13 characters
WCR-G54 Access Point Page 2
Advertisement
