Infrared Communication - Mitsubishi Electric Pedion Owner's Handbook Manual

Infrared communication

Problem
The infrared feature does not
work
Erroneous data is transmitted
or received
Possible solutions
♦
Make sure the surface of the infrared port is clean.
♦
Make sure there is a clear line-of-sight between the Pedion and the
infrared device and that there is nothing obstructing the infrared beam.
♦
Check the settings in the Infrared Monitor in the Windows Control
Panel.
♦
Use BIOS Setup to make sure that the infrared port is enabled.
♦
Make sure that the Pedion and the infrared device are no more than one
metre apart.
♦
Make sure that bright artificial light or sunlight is not interfering with
the infrared beam.
♦
Make sure that other domestic TV or VCR remote controls are not
operating near the Pedion.
♦
Use BIOS Setup to make sure that the infrared port is using the correct
communication standard.
OWNER'S HANDBOOK
T r o u b l e s h o o t i n g 7 / 9