Printer; Touchpad - Mitsubishi Electric Pedion Owner's Handbook Manual

Printer

Problem
Printer does not print

Touchpad

Problem
Touchpad does not work at
all
Touchpad responds slowly
Possible solutions
♦
Check the printer cables and connections.
♦
Make sure the printer was turned on before turning on the Pedion.
♦
Check that the Pedion is properly connected to the Multimedia Pack.
♦
Use BIOS Setup to make sure the parallel port is configured correctly
for the type of printer; e.g. some printers require ECP mode.
♦
Check that the printer driver software is properly installed. Refer to the
documentation that came with your printer.
Possible solutions
♦
If an external mouse is connected, the touchpad is automatically
disabled.
♦
Make sure there is nothing metallic on or near the touchpad.
♦
Make sure both the touchpad and your finger are clean and dry.
OWNER'S HANDBOOK
T r o u b l e s h o o t i n g 7 / 7