Touch Sensor Tone; Manual Clock Adjustment; Synchronize Clock; Dsi (Disabled System Indicator) - Kenwood KDC-307 Instruction Manual

Menu system

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"BEEP ON"
"BEEP OFF"

Manual Clock Adjustment

This adjustment can be done when the <Synchronize Clock> (page
18) is set as OFF.
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Setting
Beep is heard.
Beep canceled.
— 18 —

Synchronize Clock

Synchronizing the RDS station time data and this unit's clock.
Display
"SYNC ON"
"SYNC OFF"
It takes 3 to 4 minutes to synchronize the clock.

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
"DSI ON"
"DSI OFF"
Function of the KDC-4024/KDC-4024V

Selectable Illumination

Selecting the button illumination color as green or red.
Display Setting
"COL GRN" The illumination color is green.
"COL RED" The illumination color is red.
Setting
Synchronizes the time.
Adjust the time manually.
Setting
LED flashes.
LED OFF.