Rds Features; Traffic Information; Radio Text Scroll - Kenwood DPX501U Instruction Manual

RDS features

TI
Program Service name
Band display
Radio text

Traffic Information

Changing to traffic information automatically
when a traffic bulletin starts even when you are
not listening to the radio.
Press the [TI] button.
Each time you press the button, the Traffic
information function turns ON and OFF.
When traffic information is ON, "TI" indicator is
ON. (DPX501U only)
When a traffic information station is not being
received the "TI" indicator blinks.
When a traffic bulletin starts, "Traffic INFO"/
"TRAFFIC" is displayed and the audio changes to
traffic information.
• During reception of an AM station when the Traffic
Information function is turned ON, the frequency
changes to an FM station.
• During reception of traffic information the adjusted
volume is automatically remembered, and the next
time the audio changes to traffic information, the
volume automatically becomes the remembered
volume.
24
|
English
1 - 6
DPX701U
RDS indicator
Receiving other traffic information stations
Push the Control knob towards [4] or
[¢].
• Traffic information can be switched when it is on the
Tuner Source. However, you cannot switch the Traffic
information during reception of the Traffic bulletin
switched from the source other than the Tuner.

Radio Text Scroll

Scrolling the displayed radio text.
Push the Control knob toward [FM] for at
least 2 seconds.
• When the <Display Illumination Control> (page 37) is
set to OFF, the display may black out while scrolling.
Radio text
PTY indicator
TI indicator
Control knob
DPX501U