Other Functions; Setting The Time Display On Or Off; Using Different Entertainment Displays; Using The Aux Source - Pioneer CRD3569-A Operation Manual

Section

Other Functions

09

Setting the time display on or off

You can turn the time display on even when the
sources are off.
Press to select the time display.
CLOCK
Each press of
CLOCK
off. Time display appears on LCD display.
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 5 seconds.
Using different entertainment
displays
You can enjoy entertainment displays while
listening to each sound source.
• These are different ways of displaying the
spectrum and do not affect sound output.
1 Press
OPEN
2 Press
ENTERTAINMENT
Each time you press
display changes in the following order:
Source Icon Display
— —
BGV 4 BGV 5
Spectrum Analyzer 2
Level Indicator 2
—
Movie 1 Movie 2
• BGV stands for Back Ground Visual.
48 En
turns time display on or
to open the front panel.
.
ENTERTAINMENT
— — —
BGV 1 BGV 2
—
BGV 6 Spectrum Analyzer 1
— —
Level Indicator 1
— —
Level Indicator 3
—
Entertainment Clock

Using the AUX source

An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner's manual.

Selecting AUX as the source

Press
SOURCE
Press
SOURCE
• If the auxiliary setting is not switched on,
cannot be selected. For more details, see
Switching the auxiliary setting on page 45.

Setting the AUX title

The title displayed for the
changed.
1 Press
2 After you have selected
the
press
FUNCTION
in the display.
—
BGV 3
—
3 Press
desired character type.
Press numbered button repeatedly to switch
1
between the following character type:
Alphabet
Alphabet
• You can select to input Numbers and Symbols
by pressing
to select as the source.
AUX
until appears in the display.
AUX
source can be
AUX
to open the front panel.
OPEN
AUX
and hold until
numbered button to select the
1
(Upper case),
Numbers
(Lower case)
numbered button.
2
AUX
as the source,
appears
TITLE
and —
Symbols