Adjusting Loudness; Using Subwoofer Output; Adjusting Subwoofer Settings - Pioneer CRD3569-A Operation Manual

Pioneer car cd player model number: crd3569-a
Table of Contents

Advertisement

Available languages

Available languages

Audio Adjustments
Each press of 5 or ∞ increases or decreases
the treble level.
is displayed as the level
+6
–6
is increased or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press
to open the front panel.
OPEN
2 Press
to select
.
AUDIO
Loud
Press
until
appears in the display.
AUDIO
Loud
3 Press 5 to turn loudness on.
Loudness level (e.g.,
) appears in the
Loud Mid
display.
4 Press 2 or 3 to select the level.
Press 2 or 3 until the desired level appears in
the display.
(low)—
(mid)—
(high)
Low
Mid
High
5 Press ∞ to turn loudness off.
appears in the display.
Loud OFF

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off.
1 Press
to open the front panel.
OPEN
2 Press
to select
.
AUDIO
Sub-W1
When the subwoofer controller setting is
S.W
, you can select
. Press
Control:EXT
Sub-W1
until
appears in the display.
AUDIO
Sub-W1
Section
07
3 Press 5 to turn subwoofer output on.
appears in the display.
Sub-W1 Normal
Subwoofer output is now on.
• You can turn off subwoofer output by pressing
∞.
4 Press 2 or 3 to select the phase of sub-
woofer output.
Press 2 to select reverse phase and
Rev.
appears in the display. Press 3 to select normal
phase and
appears in the display.
Normal

Adjusting subwoofer settings

When the subwoofer output is on, you can
adjust the cut-off frequency and the output level
of the subwoofer.
1 Press
to open the front panel.
OPEN
2 Press
to select
.
AUDIO
Sub-W2
When the subwoofer output is on, you can
select
. Press
until
Sub-W2
AUDIO
Sub-W2 80
(Hz) appears in the display.
• If the subwoofer setting has been previously
adjusted, the frequency of that previously
selected will be displayed, such as
(Hz) or
50
125
(Hz).
3 Press 2 or 3 to select cut-off frequency.
Press 2 or 3 until the desired cut-off frequency
appears in the display.
(Hz)
50
80
125
• Only frequencies lower than those in the
selected range are output from the subwoofer.
4 Press 5 or ∞ to adjust the output level of
the subwoofer.
Each press of 5 or ∞ increases or decreases
the level of the subwoofer.
is displayed
+6
–6
as the level is increased or decreased.
Press 5 or ∞ until you see the desired value
displayed.
Page 41
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Deh-p840mp

Table of Contents