Auxiliary Input Display Setting - Kenwood CD Receiver Instruction Manual

Kenwood cd receiver instruction manual
Table of Contents

Advertisement

Available languages

Available languages

6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.

Auxiliary Input Display Setting

Selecting the display when this device is switched to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2
Enter Auxiliary input display setting mode
Press the [DISP] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX"
• "TV"
• "VCP"
• "GAME"
• "PORTABLE"
• "DVD"
4
Exit Auxiliary input display setting mode
Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
— 13 —

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kdc-4019Kdc-419Kdc-x459Kdc-mpv619Kdc-31900271-13000

Table of Contents