Adjusting The Oven Temperature - Frigidaire Gas Range Use & Care Manual

Hide thumbs Also See for Gas Range:
Table of Contents

Advertisement

Setting bake time and start time
The bake time and start time keys may be used to set the
length of baking time and to delay the starting time (delayed
timed bake). The oven will turn on at a later time and stop
automatically after the set bake time ends.
To program oven for a delayed start time and to shut-off
automatically
1. Be sure that the clock displays the correct time of day.
2. Place food in the oven.
3. Press bake. — — — ° appears in the display. Within 5
seconds, press the
show 350°F (177°C). The temperature can then be
adjusted in 5°F increments by holding the Up arrow or
Down arrow, (1°C if the control is set for Celsius).
4. Press bake time.:00 will appear in the display.
5. Press
or
6. Press start time. The time of day will appear.
7. Press the
or
8. Once the controls are set, the control calculates the
time when baking will stop. The oven will turn on at the
delayed start time and begin heating. The oven will turn
off when the set bake time ends.
When the set bake time runs out
1. End will appear in the display and the oven will shut off
automatically.
2. The control will beep 3 times every 60 seconds as a
reminder until clear off is pressed.

Adjusting the oven temperature

Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature recommen-
dations carefully. If you think the oven is cooking too hot or
too cool for your recipe times, you can adjust the control so
the oven cooks hotter or cooler than the temperature
displayed.
To adjust oven temperature
1. Press bake.
2. Set the temperature to 550°F (288°C) by pressing and
holding
.
or
. The display will
until desired baking time appears.
to reach desired start time.
SETTING OVEN CONTROLS
3. Within 3 seconds, press and hold bake until numeric
digit(s) appear. Release bake key. The display now
indicates the amount of degrees offset between the
original factory temperature setting and the current
temperature setting. If the oven control has the original
factory calibration, the display will read 0.
4. The temperature can now be adjusted up or down 35°F
(19°C), in 5°F increments. Press and hold
adjust the temperature higher until the desired amount
of offset appears in the display. When lowering the oven
temperature using
before the number to indicate that the oven will be
cooler by the displayed amount of degrees.
5. When you have made the desired adjustment, press
clear off to go back to the time of day display.
NOTE
Oven temperature adjustments made will not affect
the broil or self-cleaning feature temperatures.
If the display is set for Celsius, adjustments made will
be in 1°C increments each press of arrow keys.
Do not use oven thermometers such as those found
in grocery stores to check the temperature settings
inside your oven. These oven thermometers may vary
as much as 20 to 40 degrees from actual tempera-
tures.
To set the oven lockout feature
1. Press clear off and hold for 3 seconds. Loc will appear
in display, the Door Locked indicator light will flash and
the motor driven door lock will begin to close automati-
cally. Allow about 15 seconds for the oven door to lock.
Once the oven door is locked, the current time of day
will appear in the display.
2. To cancel the oven lockout feature, press clear off and
hold for 3 seconds. The control will unlock the oven
door and resume normal operation.
NOTE
Do not open the oven door while the indicator light is
flashing. Allow about 15 seconds for the oven door to
lock. Once the oven door is locked, the current time of
day will appear in the display.
If any control key is pressed with the oven lockout feature
active, Loc will appear in the display until the control key
is released.
, a minus sign (-) will appear
to
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gas cooktop

Table of Contents