Basic Configuration - NEC i-Series Gateway Quick Installation Manual

Basic Configuration

1. Press Enter. The Welcome Screen of the MI is displayed.
(See Figure 3.)
Figure 3. Welcome Screen
The MI requires a screen size of 24 lines X 80 columns. Make sure the Welcome Screen
is bordered on all four sides with a # symbol, as shown in Figure 3.
2. Press any key to continue. The Main Menu will appear.
3. If you already familiar with using the MI proceed to the next page for information on setting the
parameters for different Installation Environments.
or
4. Press F1 for the MI Help Screen that provides basic information for navigating through the interface.
i-Series Gateway 
IMPORTANT TERMINAL SETTINGS
To enlarge the screen (within the VT-100 application)
Click any corner of the screen.
Drag the screen to enlarge.
Check that the screen is bordered by "#" symbols.
Page 9 G-6000G-SKE, Rev AA