Reinstalling Software - Panasonic CF-T5 series Operating Instructions Manual

Reinstalling Software

Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk
data including the backup data of the Recover Pro will be erased.
Back up important data to other media or an external hard disk before reinstallation.
Preparation
Prepare the Product Recovery DVD-ROM (included).
Prepare the Panasonic CD/DVD drive (optional): CF-VDRRT1M, CF-VDRRT2W, CF-VDRRT3W.
Remove all peripherals (except for the CD/DVD drive).
Connect the AC adaptor and do not remove it until reinstallation is complete.
CAUTION
If you have installed the Recover Pro (
If you select [3], the Recover Pro will no longer function properly.
• Only when you want to save the data which you stored in the separate partitions other than the first partition and
the Recover Pro backup area, select [3] in the step 9 below and perform the following steps.
A After reinstallation, backup the data to external media (e.g., removable disk).
B Perform the reinstallation procedure again, and select [1] or [2] in the step 9.
C Return the data backed up in external media to the internal hard disk.
<For MUI OS model>
To input numbers, press the NumLock key and input in the Ten-key mode.
For German keyboard, press Z when you need to press Y.
1 Turn off the computer and connect the CD/DVD drive to the computer.
2 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
3 Write down all of the contents of the Setup Utility and press
At the confirmation message, select [Yes] and press Enter.
4 Select the [Boot] menu, then select [USB CDD] and press
top of [Boot priority order].
5 Set the Product Recovery DVD-ROM into the CD/DVD drive.
6 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
7 Press to execute [1. [Recovery]].
1
The License Agreement screen appears.
To cancel partway, press 0.
8 Press to select [1. Yes, I agree to the provisions above and wish to continue!].
1
9 Select the settings.
[2]: Enter the size of operating system partition and press Enter.
(The size of data partition will be determined by subtracting the operating system partition size from the
maximum size.)
[3]: Windows will be installed in the first partition.
(If the size of the first partition is smaller than the specific value, installation will not be possible.)
10 At the confirmation message, press
Reinstallation starts automatically. (It will take approximately 20 minutes.)
Do not interrupt reinstallation, for example by turning off the computer or pressing Ctrl + Alt + Del. Other-
wise reinstallation may become unavailable as Windows may not start up or the data may be corrupted.
11 Remove the Product Recovery DVD-ROM, and then press any key to turn off the com-
puter, then remove the CD/DVD drive.
12 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
24
page 21), select [1] or [2] in the step 9 below.
while [Panasonic] boot screen is displayed.
F2
.
Y
while [Panasonic] boot screen is displayed.
F2
.
F9
until [USB CDD] is at the
F6