Te L 13942296513 - Sony D-NE800 Service Manual

QQ
3 7 63 1515 0
SERVICE MODE
The following confirmation can be performed when the Service
Mode is set.
1. How to set the Service Mode.
To set the Service Mode, the following method is available.
1) Confirm the set is not powered on.
2) Confirm the following settings.
OPEN/CLOSE detect switch (S820) ........ OFF
Solder Land (SL825) ................................ OPEN
[HOLD] switch (S810) ............................... OFF
G-PROTECTION FUNCTION ................ G-PRO1
AVLS FUNCTION ................................... OFF
3) Short the solder land SL824 (TEST) on the MAIN board.
4) Turn on the main power.
– MAIN BOARD (SIDE A) –
TE
L 13942296513
S820
(OPEN/CLOSE)
SL825
(OPEN)
www
.
http://www.xiaoyu163.com
SL824
(TEST)
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
2. Operation when the Service Mode is set.
When the Service Mode becomes active, following messages are
displayed onthe remote control LCD.
Microcomputer
version display
1) Turn off the power.
2) Open the solder land SL824 (TEST) on the MAIN board.
Note : The solder should be removed clean.
Q Q
3 6 7 1 3 1 5
co
.
D-NE800
9 4 2 8
VP094f
0 5 8 2 9 9 4 2 8
m
9 9
9 9
5