Tv Watching; Function During Tv Screen; Functions When Displaying The Easy Control Panel - Kenwood DDX5034M Instruction Manual

TV Watching

Various control screens appear in the TV source mode. You can only operate TV with the optional accessory
TV Tuner connected.

Function During TV Screen

Basic functions are available even when the TV
screen is displayed.
1 Display the TV screen
[TV] button on the "Source Select" screen
Mode:Full
TV
7
6
8
1 2
TV TV1
G ro u p 1
AUTO1
1 TV Band Number Display
2 TV Area Group Display
See <TV Setup> (page 72).
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
Increases the channel.
6 Channel Down Area
Decreases the channel.
7 Band Switch Area
Switches to TV1 or TV2.
8 Information Display Button Area
⁄
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
AV–OUT:AV–IN
5
3 4
P r e s e t 1 2 c h
IN AF
Functions When Displaying the Easy
Control Panel
Displays the basic operation buttons on the
screen.
1 While the source is playing, press the [FNC]
button
Mode:Full
TV
SCRN
TI
1 1
T V T V 1
1 Selects a channel.
Use the <Seek Mode> (page 39) to change
the channel tuning sequence.
2 Switches to TV1 or TV2.
3 Switches to the Seek mode.
See <Seek Mode> (page 39).
⁄
• When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
• The Easy Control Panel is hidden when you touch a
central part of the monitor.
AV–OUT:AV–IN
2 3
BAND SEEK
2 c h
P r e s e t 1
English 37