Advertisement
Ceramic Coal
• This product uses a fuel effect piece containing
Refractory Ceramic Fibres (RCF), which are
man-made vitreous silicate fibres. Excessive
exposure to this material may cause temporary
irritation to eyes, skin and respiratory tract.
Consequently, it makes sense to take care when
handling this article to ensure that the release of
dust is kept to a minimum.
• Although light coatings of soot are usually burnt
off during normal use, the coal may benefit
from occasional cleaning.
• Should any soot accumulation become
excessive, the fuel effect piece should be
removed from the fire for cleaning. Cleaning
should be carried out in a well ventilated area or
in the open air by gently brushing with the
pieces held away from your face so that you
avoid inhaling the dust. We do not recommend
the use of a normal domestic vacuum cleaner
which may blow dust back into the air.
• The coal can be lifted out of the fire box when
the window surround and glass have been removed as described on page 8.
• When replacing the coal, make sure that it rests on the ledges at the sides of the firebox
and that its back face is touching the horizontal rib at the back of the firebox. See
figure 6.
• Replace the window and surround after cleaning.
- Make sure that the outside edges of the window surround sides are inside the outer
case.
OWNER'S GUIDE
Page 9
Figure 6 Coal bed location
Advertisement
