OCEANUS DSC/ATIS_ENG_0512
2. SETUP
1.
Press MENU to enter Menu Operation.
Press CH M once to display
2.
and press SELECT.
has some options as follows. To exit,
SETUP
select
EXIT
2-A. ALARM CLOCK
This feature is only available when the GPS is connected to the
NMEA0183 Accessory Wires. If it is connected to the GPS, the alarms
are set based on the satellite. You need to set the time previously to
setting the alarm.
2-A-1. ALARM SET
This feature allows you to set the alarm.
1.
Press SELECT at
ALARM CLOCK
2.
Press SELECT.
Press CH L or M to select On.
3.
Then, press and hold SELECT.
Select the hour using CH L and M,
4.
then press SELECT.
Select the minute using CH L and M,
5.
then press SELECT.
5/12/05
10:34 AM
.
SETUP
.
appears.
Page 27
SETUP
,
27