Key To Symbols; Symbols On The Machine; Explanation Of Warning Levels - Husqvarna PG280 Operator's Manual

Symbols on the mac hine:
W ARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Wear personal protective equipment.
See instructions under the heading
"Personal protective equipment".
WARNING! Dust forms when grinding,
which can cause injuries if inhaled. Use
an approved breathing mask. Always
provide for good ventilation.
En vironmental marking. Symbols on
the product or its packaging indicate
that this product cannot be handled as
domestic waste.
By ensuring that this product is taken
care of correctly, you can help to
counteract the potential negative
impact on the environment and people
that can otherwise result through the
incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Other symbols/decals on the mac hine refer to special
certification requirements for certain markets.
Explanation of warning le vels
The w arnings are graded in three levels.
W ARNING!
W ARNING! Indicates a hazardous
!
situation which, if not avoided, will result
in death or serious injury.
CAUTION!
CA UTION! Indicates a hazardous
!
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE!
NO TICE! Is used to address practices not related to
personal injury.
2 – English
KEY T O SYMBOLS