Preset Memory; Preset Tuning; Auto Memory Entry - Kenwood KTC-HR300 Instruction Manual

Kenwood hd radio tuner unit instruction manual
Hide thumbs Also See for KTC-HR300:
Table of Contents

Advertisement

Preset Memory

Putting the frequency and channel in the memory.
1
Select the band
Press the [FM] or [AM] button.
2
Select the frequency and channel to put in the
memory
Press the [4] or [¢] button.
3
Put the frequency and channel in the memory
Press the desired [1] — [6] button for at least 2
seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory
on each [1] — [6] button.

Preset Tuning

Calling up the frequency and channel in the
memory.
1
Select the band
Press the [FM] or [AM] button.
2
Call up the frequency and channel
Press the desired [1] — [6] button.
• "Linking" will be displayed for few seconds until it is
received.
• When <Receive Mode> (page 4) is set to Digital or
Analog, it cannot be received if the setting is differed
from the preset.

Auto Memory Entry

Putting a station with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
Save 6 stations with the best reception in the
memory and close Auto Memory Entry.
• Sub channel of Digital FM cannot be registered.
5
|
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents