Hitachi CU-HD500 Operating Instructions Manual page 24

Function menu
SD-SETTING menu
■ＳＤ ＳＥＴＴＩＮＧ
ＡＳＰＥＣＴ ：１６：９
ＷＦＭ ：ＥＮＣ
ECC filter indication
When the FILTER setting is ON, the ECC filter is displayed at the lower center of the screen. The display depends on the optical
filter position.
ECC_FILTER
PIX OUT camera status display
Optical filter
Item Setting
ASPECT 16:9,4:3
WFM R, G, B, ENC, SUP, SEQ
A.3200K
B.4300K
C.5600K
D.6300K
E.8000K
１．３２００Ｋ Ａ．３２００Ｋ Ｆ８．０
ECC filter
12
Factory setting
16:9 Select the SD aspect ratio.
ENC Set the WFM CONTROL (Control Signal output).
SD-SDI, the HD-SDI output, and WFM CONTROL
are connected with a SDI Waveform monitor,
the control synchronizes with the Waveform monitor.
*Please see 19 page "Service information - WFM
CONTROL" in detail.
Displays ECC filter information with
optical filter 1.
Lens iris
Description