Hitachi CU-HD500 Operating Instructions Manual page 23

Function menu
SYSTEM TIMING menu
■ＳＹＳＴＥＭ ＴＩＭＩＮＧ
ＨＤ Ｈ ＰＨＡＳＥ ： ０（ ０）
ＳＤ ＳＤＩ Ｈ Ｐ ： ０（ ０）
ＧＬ Ｈ ＰＨＡＳＥ ：１０８（ １７２８）
PIX DISPLAY menu
■ＰＩＸ ＤＩＳＰＬＹ
ＦＩＬＴＥＲ ：ＯＮ
ＥＣＣ ：ＯＮ
ＩＲＩＳ ：ＯＮ
SD-DTL menu
■ＳＤ ＤＴＬ
ＳＤ ＤＴＬ ：ＯＮ
Ｈ ＧＡＩＮ ： ０
Ｖ ＧＡＩＮ ： ０
Ｈ ＣＲＩＳＰ ：－１２８
Ｖ ＣＲＩＳＰ ：－１２８
ＤＴＬ ＦＲＥＱ ：５ＭＨｚ
ＬＥＶＥＬ ＤＥＰ ：－１２８
ＬＥＬ ＤＥＰ ＳＬＰ：－１２８
Item Setting
HD H PHASE -128(-512 )to +127(511)
SD SDI H P -128(-256 )to +127(255)
GL H PHASE -128(-2048 )to +127(2047)
Item Setting
FILTER OFF, ON
ON/OFF
ECC OFF,ON
IRIS OFF, ON
Item Setting
SD DTL OFF,ON
H GAIN -128 to +127
V GAIN -128 to +127
H CRISP -128 to +127
V CRISP -128 to +127
DTL FREQ 4MHz,5MHz,6MHz,
7MHz,8MHz
LEVEL DEP -128 to +127
LEV DEP SLP -128 to +127
11
Factory setting
0 Adjust HD-SDI output phase to VBS.
0 Adjust SD-SDI output phase to VBS
108( 1728) Adjust HD/SD-SDI output phase to genlock
signal.
Factory setting
ON Sets the types of the PIX OUT optical filter display and
ECC filter display.
For details, see the filter display below.
ON Display the Electric Color Correction filter.
ON Display the F-value of the lens iris.
Factory setting
ON Enable the DTL function of SDTV.
0 Adjust the SDTV Horizontal DTL level.
0 Adjust the SDTV Vertical DTL level.
-128 Set the operation threshold level of horizontal DTL in
order to prevent to emphasize noise.
-128 Set the operation threshold level of vertical DTL in
order to prevent to emphasize noise.
5MHz Set the Horizontal DTL boost frequency.
-128 Dark component DTL level adjustment slice.
-128 Dark component DTL level adjust slope.
Description
Description
Description