Hitachi CU-HD500 Operating Instructions Manual page 17

Facility names and functions (Rear)
14
13
13 HD SDI OUT connectors (BNC)
Outputs three lines of digital serial HDTV video
signals.
14 HD/SD SDI connectors (BNC)
Outputs four lines of digital serial HDTV/SDTV
video signals.
Select the HD-SDI or SD-SDI by the user function
menu.
The character is superimposed in PIX output.
15 D.RET input connectors (BNC)
Inputs for digital serial AUX video signals.
A signal selected among these four inputs is sent to
the camera viewfinder or the SK-HD1000's RET
connector
The signal can be selected by user function menu..
Important notice
When using return video, please input correct format
signal which is selected on the return assignment
menu
(page 9).
16 PROMPT connectors (BNC)
Input for the prompter video signal. The signal is
sent to the CA-HF1000 PROMPT out connector.
24
16
17
15
26
18
25
28
27
29
17 Genlock connectors (BNC)
Input for tri-level sync signal or black burst signal
for genlock operation.
18 REMOTE connector
Connection for the optional camera control panel or
setup control unit.
19 Fiber connector
Connect Fiber cable.
20 AC IN connector
Input for AC power supply.
21 FG terminal
Frame ground terminal.
22
M I C O U T 1 co nne ct o r (X LR 3 p i n)
Outputs MIC1 audio signals from a camera or the
CA-HF1000 at 0 dBm.
23
M I C O U T 2 co nne ct o r (X LR 3 p i n)
Outputs MIC2 audio signals from the CA-HF1000 at
0 dBm.
24
M I C R E M O T E co nne ct o r
This connector is used to select the MIC1 and MIC2
amplifier gains.
5
19
22
23
20
21