Kenwood KDV-C810 Instruction Manual page 37

?
The subtitle is not displayed.
✔ The DVD disc being played does not contain the recording of
subtitles.
☞ The subtitle cannot be displayed when the DVD disc being played
does not contain the recording of subtitles.
?
The voice (or subtitle) language cannot be changed.
✔ The DVD disc being played does not contain the recording of more
than one audio (or subtitle) language.
☞ The voice (or subtitle) language cannot be changed when the DVD
disc being played does not contain the recording of more than one
voice (or subtitle) language.
?
The viewing angle cannot be changed.
✔ The DVD disc being played does not contain the recording of more
than one angle.
☞ The viewing angle cannot be changed when the DVD disc being
played does not contain the recording of more than one angle.
✔ You are attempting to switch the angle in a DVD section where more
than one angle is not recorded.
☞ More than one viewing angle may be recorded only in limited
sections in a disc.
?
Playback will not start even after a title is selected.
✔ A viewing restriction (RATING) has been set for the disc.
☞ Check the viewing restriction level (RATING) setting.
?
The voice or subtitle language selected in the initial setting is not
played.
✔ The DVD disc being played does not contain the recording of the
selected voice or subtitle language.
☞ Use a DVD disc containing the recording of the selected voice or
subtitle language.
MP3 source
?
Cannot play an MP3.67
✔ Not conforming to ISO 9660 Level 1/2, and Joliet.
☞ Use a medium conforming to ISO 9660 Level 1/2, and Joliet.
✔ The MP3 has no or invalid track name
☞ Add the ".MP3" extension to the MP3 track name.
✔ The media is scratched or
dirty.69
☞ Clean the media, referring to the section on <Disc cleaning>
(page 6).
extension.68
— 37 —
?
Noise or no sound generated when an MP3 is
✔ The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
?
Takes time before the unit starts playing
✔ The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
?
Fails to play MP3 in the intended
✔ The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
?
The sound skips when an MP3 is being
✔ The media is scratched or dirty.
☞ Clean the media, referring to the section on <Disc cleaning>
(page 6).
✔ The recording condition is
bad.73-2
☞ Record the media again or use another media.
?
Can't enter Folder Select mode.76
✔ There's no folder recorded in the MP3 media.
☞ Use a media with levels.
?
The songs in the selected folder aren't played in Folder Select
mode.77
✔ There are no MP3 in the selected folder.
☞ Make sure there's recorded content in the MP3 media.
?
The MP3 track/disc search takes
✔ Many tracks are recorded on the media.
☞ When the media directory is complex, the track/disc search can
take time.
played.70
MP3.71
order.72
played.73-1
time.78