Security Code; Touch Sensor Tone; Manual Clock Adjustment - Kenwood KDC-5019 Instruction Manual

When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4
Enter the Security Code
Press the [#1] — [#4] button.
Example: If the Security Code is "3510".
Step Button
1 [#1]
2 [#2]
3 [#3]
4 [#4]
5
Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
6
Do the step 4 and 5 step operation, and reenter the security
code.
"APPROVED" is displayed.
The Security Code function activates.
When a Code different from step 4 is entered, repeat from step 4.
Press the Reset button and when it's removed from the
battery power source
#Times pressed Display
4 "3"
6 "5"
2 "1"
1 "0"
1
Turn the power ON.
2
Do the step 4 and 5 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.

Touch Sensor Tone

Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"

Manual Clock Adjustment

1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
2
Enter Clock Adjust mode
Press the [4] or [¢] button for at least 1 second.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
— 19 —
Setting
Beep is heard.
Beep canceled.